FC (%) min | ASH (%) max | V.M (%) max | Mesh | Application |
---|---|---|---|---|
40-45 | BY Difference | 1.5 | -100 & -200 | Graphite Paint(Both Water & Alcohol Base) |
50-55 | BY Difference | 1.5 | -100 & -200 | Ingot Mould Manufacturers |
60-65 | BY Difference | 1.5 | -100 & -200 | Graphite stopper Hesds |
70-75 | BY Difference | 1.5 | -100 & -200 | Friction Material |
80-85 | BY Difference | 1.5 | -100 & -200 | Lubricants |
90-95 | BY Difference | 1.5 | -100 & -200 | Pencil Manufacturers |
FC (%) min | ASH (%) max | V.M (%) max | Mesh | Application |
---|---|---|---|---|
70-75 | BY Difference | 2 | -200 & -300 | C.I.Foundry |
80-85 | BY Difference | 2 | -200 & -300 | Steel Plant |
90-95 | BY Difference | 1.5 | -200 & -300 | Refractories |
FC (%) min | ASH (%) max | V.M (%) max | Mesh | Application |
---|---|---|---|---|
80-85 | BY Difference | 1.5 | -20+50 -50+80 -20+80 |
Graphite Crucible Manufacturers |
90-95 | BY Difference | 1.5 | -20+50 -50+80 -20+80 |
Carbon Brush,Graphite Rope & Sheet Mabufacturers, Refractories & Copper Smelting |
Serial No. | Type | FC (%) min | ASH (%) max | V.M (%) max | S (%) max | Moisture (%) max | Application |
---|---|---|---|---|---|---|---|
1 | Graphitized Petroleum Coke | 99 | 0.5 | 0.5 | 0.03 | 0.5 | Carbon Addition in S.G Iron, Ductile Iron & Cast Iron |
2 | Graphitized Petroleum Coke | 98.5 | 1 | 0.5 | 0.05 | 0.5 | -Do- |
3 | Graphitized Electrode Scrap | 98.5 | 1 | 0.5 | 0.05 | 0.5 | -Do- |
4 | Pitch Coke | 96.5 | 1.5 | 2 | 0.5 | 0.5 | -Do- |
5 | Calcined Petroleum coke | 98.5 | 1 | 0.5 | 0.8 | 0.5 | -Do- |
6 | Carbon additive | 93 | 6 | 1 | 0.25 | 0.5 | -Do- |
7 | Carbon additive | 90 | 9 | 1 | 0.35 | 0.5 | -Do- |
FC (%) min | ASH (%) max | V.M (%) max | S (%) max | N (%) max | Application |
---|---|---|---|---|---|
90-96 | 3.5-9.5 | 0.5 | 0.18-0.25 | 0.20-0.25 | Electrode Carbon Paste |
FC (%) min | ASH (%) max | V.M (%) max | S (%) max | R.D (g/cm3) | Application |
---|---|---|---|---|---|
99 | 0.5 | 0.5 | 0.05 | 2-2.1 | Brake Pads & Clutches |